Converts any board to electric in minutes. As our best-value option, the middle-tier Cruiser Kit gives you that added range with an extra battery. Ideal for those looking to go the extra mile.
The versatility of dual batteries for more range, but can still be run on a single battery if weight is an issue. Comes with everything needed to mount to your board (you will need board + trucks to fit). It is also a great starting point to upgrade later to the R, definitely a best-value option.
In The Box
x1 Dual Baseplate
x1 Charger (2 amp)
x1 Remote Control
x1 Skate Tool & Assembly Kit
x3 Standard wheels (with bearings)
Voltage: 36 V nominal | 42 V max.
Capacity: 2.5 Ah
Charging Time: 80 minutes (each / using 2 A charger)
Connectivity: CAN bus to other Batteries and Cores
Enclosure material: Fiber-reinforced nylon (tough as nails!)
USB Type-C port for charging accessories
Sealed to IP65 spec
Power (SOLO & Cruiser): 840 W Max.
Rider Weight Limit: Tested to 110 kg / 240 lbs (riders on heavier end should opt for R drivetrain)
Drive System: FOC with Regenerative Braking
Throttle: Remote Control with user-tunable parameters
Wheel Diameter: 82.5 mm
Contact Patch: 58 mm
Input: 100 V – 240 V | 50 Hz / 60 Hz
Working Temperature: -10 °C to 40 °C
Charging Temperature: 0 °C to 40 °C
CCharge Time (2 A): 2 Hours and 30 minutes
Charge Time (3 A): 1 Hour and 50 minutes
Our wheels and motors are mild offset 82.5 mm x 64 mm which means you must account for wheel bite (wheels rubbing against the deck) on your setup. Wheel bite stems from a combination of deck shape, truck style, and wheels. We have made it work on 90% of boards with the included spacers but some experimenting will be needed on your end to get a perfect fit.
The motor can be mounted either on the toe or heel side. Installation requires no weird tools or modifications and is fully reversible.
Mounting the carbon baseplate is done with wedge spacers that mildly reduce rear truck responsiveness (providing a more stable ride).
An additional optional bolt can be used to secure the carbon baseplate to the deck, this means you need to drill into your deck. This bolt is totally optional and we seldom use it in our test setups, but the options is there for you.
Pas de questions pour le moment.
|Poser une question|